Inspection |
1. |
Check the tire pressure.
17(inch) : 241+7kPa (35 + 1.0 psi)
18(inch) : 241+7kPa (35 + 1.0 psi)
19(inch) : 241+7kPa (35 + 1.0 psi) |
1. |
Rotate the front right and front left tires, and perform a road test in order to confirm vehicle stability. |
2. |
If the steering pulls to the opposite side, rotate the front and rear tires, and perform a road test again. |
3. |
If the steering continues to pull to one side, rotate the front right and left tires again, and perform a road test. |
4. |
If the steering continues to pull to the opposite side, replace the front wheels with new ones. |
|
1. |
Measure the tread depth of the tires.
|
2. |
If the remaining tread depth (A) is less than the limit, replace the tire.
|
Repair procedures
On-vehicle Inspection
Inspect ignition coil assembly and Perform spark test
1.
Check for DTCs.
•
If a DTC is present, perform troubleshooting in accordanc ...
Repair procedures
Fuel Pressure Test (Low pressure system)
1.
Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - Repair Procedures - "Release Residual Pressure in Fuel Line").
...