Inspection |
Be sure that the vehicle is on level ground. |
1. |
Warm up and stop the engine, and then wait for 5 minutes. |
2. |
Turn the engine off and wait for a few minutes (about 5 minutes) for the oil to return to the oil pan. |
3. |
Pull the dipstick out, wipe and re-insert it fully. |
4. |
Check that the oil level is between the "L" level mark and "F" level mark on the engine oil level gauge. |
5. |
If the level is low, check for leakage and add oil up to the full level mark.
|
1. |
Check engine oil for white turbidity or heavy contamination. |
2. |
If engine oil becomes turbid and white, it is highly probable that it is contaminated with engine coolant.
Repair or replace damaged parts. |
Replacement |
|
1. |
Park the car on level ground. |
2. |
Drain engine oil.
|
3. |
Replace the oil filter.
|
4. |
Fill new engine oil.
|
5. |
Start the engine and check that no oil is leaking from the drain plug or oil filter. |
6. |
Recheck the engine oil level.
|
Outside rearview mirror may not alert the driver when
- The outside rearview mirror housing is severely polluted
- The window is severely polluted
- The windows are severely tinted.
This device complies with Industry Canada licence-exempt RSS standard ...
132,000 km (82,500 miles) or 66 months
❑ Rotate tire
❑ Inspect battery condition
❑ Inspect air cleaner filter
❑ Inspect vacuum hose
❑ Inspect power steering fluid (if equipped)
❑ Inspect power ...