Inspection |
1. |
Check belt for maintenance and V-ripped part for abnormal wear. Replace if necessary.
|
2. |
Visually check the belt for excessive wear, frayed cords etc.
If any defect has been found, replace the drive belt.
|
Removal and Installation |
1. |
Remove the engine room under cover and engine room RH side cover.
(Refer to Engine And Transaxle Assembly - "Engine Room Under Cover") |
2. |
To release the tension, turn the drive belt tensioner counterclockwise and then remove the drive belt (A).
[HPS]
[MDPS]
|
3. |
Install in the reverse order of removal. |
Removal and reinstallation
To remove the headrest :
1. Raise it as far as it can go then press the release button (1) while pulling
the headrest up (2).
To reinstall the headrest :
1. Put the headrest poles (3) into the ...
Description and Operation
Refrigeration Cycle
...