Lift And Support Points |
When heavy rear components such as suspension, fuel tank,
spare tire, tailgate and trunk lid are to be removed, place additional
weight in the luggage area before hoisting. When substantial weight is
removed from the rear of the vehicle, the center of gravity may change
and can cause the vehicle to tip forward on the hoist. |
|
1. |
Place the lift blocks under the support points as shown in the illustration. |
2. |
Raise the hoist a few inches (centimeters) and rock the vehicle to be sure it is firmly supported. |
3. |
Raise the hoist to full height to inspect the lift points for secure support. |
Audio Unit Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the center fascia upper panel.
(Refer to Body - "Center Fascia Panel")
3.
Remove the audio head unit (A) after loosening ...
Parking Brake Cable Repair procedures
Removal
Parking brake pedal Type
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash pad lower panel")
...