The auto lock mode will help prevent the normal movement of the child in the vehicle from causing the seat belt to loosen and compromise the child restraint system. To secure a child restraint system, use the following procedure.
To install a child restraint system on the outboard or center rear seats, do the following :
1. Place the child restraint system in the seat and route the lap/shoulder belt around or through the restraint, following the restraint manufacturer
Shift Cable Repair procedures
Removal
1.
Move the shift lever to "N" range.
2.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner)
3.
Remove the battery and battery tray.
(Refer to Eng ...
Heated Steering wheel Repair procedures
Inspection
1.
Measure the resistance of NTC and Heated pad.
–
NTC resistance : 3.42 ~ 4.18 kΩ (Standard : 25°C)
–
Heated pad resistance : 1.5 ~ 1.9 Ω (Standard : 19 ~ 2 ...