Kia Sedona: To temporarily accelerate with the cruise control on - Cruise control system - Driving your vehicle - Kia Sedona YP Owners ManualKia Sedona: To temporarily accelerate with the cruise control on

Third generation YP (2014-2024) / Kia Sedona YP Owners Manual / Driving your vehicle / Cruise control system / To temporarily accelerate with the cruise control on

If you want to speed up temporarily when the cruise control is on, depress the accelerator pedal. Increased speed will not interfere with the cruise control operation or change the set speed.

To return to the set speed, take your foot off the accelerator.

To decrease the cruising speed
Follow either of these procedures: Move the lever down (to SET-) and hold it. Your vehicle will gradually slow down. Release the lever at the speed you want to maintain. Move the lever down ...

To cancel cruise control, do one of the following
Depress the brake pedal. Shift into N (Neutral) with an automatic transaxle. Press the CANCEL switch. Decrease the vehicle speed lower than the memory speed by 20 km/h (13 mph ). Decre ...

Other Information:

Auto Defogging Sensor (DATC only) Repair procedures
Inspection To inspect and diagnose the sensor, refer to Self-Diagnosis procedure and DTC guide. Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the auto defogging se ...

Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the steering wheel. (Refer to Steering System - "Steering Wheel") 3. Remove the steering column upper and lower shrouds ...

Categories


Copyright В© www.kisedona.com 2016-2024