Kia Sedona: Hill-start assist control (HAC)
A vehicle has the tendency to roll back on a steep hill when it starts to go after stopping. The Hill-start Assist Control (HAC) prevents the vehicle from rolling back by applying the brakes automatically for about 2 seconds. The brakes are released when the accelerator pedal is depressed or after about 2 seconds.
The HAC is activated only for about 2 seconds, so when the vehicle is starting off always depress the accelerator pedal.
WARNING - Maintaining Brake Pressure on Incline
HAC does not replace the need to apply brakes while stopped on an incline.
While stopped, make sure you maintain brake pressure sufficient to prevent your
vehicle from rolling backward and causing an accident. Don Rear Seat Back Cover Components and Components Location Center console storage
This system provides further enhancements to vehicle stability and steering responses
when a vehicle is driving on a slippery road or a vehicle detects changes in coefficient
of friction between r ...
Vehicle stability management (VSM)
Check to be sure the parking brake is not engaged and the parking brake
indicator light is out before driving away.
Driving through water may get the brakes wet. They can also get wet when
...
Good braking practicesOther Information:
Component Location
[Second Row Seat Assembly]
1. Second Row Seat Back Cover [RH]2. Second Row Center Seat Back Cover3. Second Row Seat Back Cover [LH]
1. Second Row Seat Back Cover
...
To open the center console storage, pull up the lever.
Center console sliding tray removal procedure
➀ Pull down the knob to slide the sliding tray.
➁ Check the lever located on t ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2024 Owners Manual
- Kia Sedona YP 2014-2024 Service Manual