1. Insert the seat belt in the belt assembly cover.
2. Insert the seat belt buckle in the seat cushion pocket.
3. Lower the headrest to the lowest position.
4. Slide the seat to the farthest rearward.
5. Fold the seat back by pull up the recline strap.
6. Pull the removal strap and lift the rear portion of the seat cushion.
7. Pull up the catch release lever under the front of the seat cushion while reclining the folded seat rearward slightly to release the front catches from the anchors.
8. Remove the entire seat from the floor.
Repair procedures
Operation and Leakage Check
Check all of the following items:
ComponentProcedureBrake Booster (A)Check
brake operation by applying the brakes during a test drive. If the
brakes do not work p ...
Vehicle stability management (VSM)
This system provides further enhancements to vehicle stability and steering responses
when a vehicle is driving on a slippery road or a vehicle detects changes in coefficient
of friction between r ...