For your safety, the automatic transaxle has a shift lock system which prevents shifting the transaxle from P (Park) into R (Reverse) unless the brake pedal is depressed.
To shift the transaxle from P (Park) into R (Reverse):
1.Depress and hold the brake pedal.
2.Start the engine or turn the ignition switch to the ON position.
3.Move the shift lever.
If the brake pedal is repeatedly depressed and released with the shift lever in the P (Park) position, a chattering noise near the shift lever may be heard. It is a normal condition.
WARNING - Shifting from park
Always fully depress the brake pedal before and while shifting out of the P (Park) position into another position to avoid inadvertent motion of the vehicle which could injure persons in or around the vehicle.
Shift-lock override
If the shift lever cannot be moved from the P (Park) position into R (Reverse) position with the brake pedal depressed, continue depressing the brake, then do the following:
1.Carefully remove the cap covering the shift-lock access hole (1).
2.Insert a screwdriver into the access hole and press down on the screwdriver.
3.Move the shift lever.
4.Have your vehicle inspected by an authorized Kia dealer immediately.
Speaker Repair procedures
Inspection
1.
Troubleshooting for Speaker
(1)
Basic inspection of speaker
Inspect the sound from speaker after verifying that the
speaker mounting screws are removed and the wiring connector ...
EBD(Electronic Brake-force Distribution) Description and Operation
Operation
The EBD system (Electronic Brake Force Distribution), a
sub-system of the ABS system, controls the maximum braking effectiveness
by the rear wheels.
It further utilizes the effici ...