1. Turn the ignition switch to the ON position.
2. Turn the fan speed control knob to the OFF (0) position.
3. Turn the mode selection knob to the defrost position ().
4. Push the air intake control button () at least 5 times within 3 seconds.
If the battery has been discharged or disconnected, it resets to the defog logic status.
Description and Operation
Description
Power Sliding Door is a system which can open/close the door
automatically by using a switch located on overhead console and rear
seat trim, internal/outer handle of a sliding door ...
Cooling Fan Description and Operation
Description
The cooling fan operates in 2 stages (HIGH/LOW). The engine
control module (ECM) controls the cooling fan according to the coolant
temperature, vehicle speed and A/C operation.
[Co ...