The ignition switch must be in the ON position for fan operation.
The fan speed control knob allows you to control the fan speed of the air flowing from the ventilation system. To change the fan speed, turn the knob to the right for higher speed or left for lower speed.
Water Temperature Control Assembly Repair procedures
Removal and Installation
To avoid damage, unplug the wiring connectors carefully while holding the connector portion.
Mark all wiring a ...
Fuel Filter Repair procedures
Replacement
1.
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”)
2.
Disconnect the fuel sender connector (A) and fuel pump connector (B).
3.
Remove the cushion pipe ...