The rear window wiper and washer switch is located at the end of the wiper and washer switch lever. Turn the switch to the desired position to operate the rear wiper and washer.
HI : Continuous wipe
LO : Intermittent wipe
OFF : OFF
The rear window wiper is switched on automatically when the ignition is in OFF and the gear is shifted to R (Reverse) while the wiper is in motion.
The automatic rear wiper function can be turned on or off in 'User setting mode' on the cluster display.
Push the lever away from you to spray rear washer fluid and to run the rear wipers 1~3 cycles. The spray and wiper operation will continue until you release the lever
To convert to cruise control mode
The driver may choose to only use the cruise control mode (speed control function)
by doing as follows:
1.Turn the SCC on (the cruise indicator light will be on but the system will
not be act ...
Components and Components Location
Components
1. Windshield glass 2. Windshield glass moulding
...