Inspection |
1. |
Turn the ignition switch ON. |
2. |
Manually operate the control switch and measure the voltage of the blower motor. |
3. |
Operate the control switch to raise the voltage up to high speed.
|
Replacement |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the luggage side trim [RH].
(Refer to Body - "Luggage Side Trim") |
3. |
Disconnect the power mosfet connector and then remove the power mosfet (A) after loosening the screws. |
4. |
Install in the reverse order of removal. |
Front Door Latch Components and Components Location
Component Location
1. Front door latch
...
Photo Sensor Description and Operation
Description
The photo sensor is located at the center of the defrost nozzles.
The photo sensor contains a photovoltaic (sensitive to
sunlight) diode. The solar radiation received by its light r ...