To program a device to HomeLink using a HomeLink button previously trained, follow these steps:
1. Press and hold the desired HomeLink button. Do NOT release until step 4 has been completed.
2. When the indicator light begins to flash slowly (after 20 seconds), position the hand-held transmitter 2-8 cm (1 to 3 inches) away from the HomeLink surface.
3. Press and hold the hand-held transmitter button (or press and
Specifications
Specification
ItemSpecificationRated VoltageDC 12.5VOperating voltageDC 12.2 ~ 15.3VOperating temperature-40°C ~ 75°COutput voltageAC 198 ~ 242V (rms)Output frequency60 ± 6 HzRated power200W ( ...
Front Seat Frame Assembly Repair procedures
Replacement
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, an ...