Kia Sedona: Blower - Heating,Ventilation And Air Conditioning - Kia Sedona YP Service ManualKia Sedona: Blower

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Heating,Ventilation And Air Conditioning / Blower

Mode Control Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when 12V is connected t ...

Blower Unit Components and Components Location
Components Location 1. Blower Unit Components 1. Inlet Seal2. Intake Actuator3. Antinoise Pad4. Blower Upper Case5. Blower Lower Case6. Blower Motor7. Inlet Duct Upper Case8. Inlet Door As ...

Other Information:

Fan speed control
The fan speed can be set to the desired speed by operating the fan speed control button. To change the fan speed, press () the button for higher speed, or push () the button for lower speed. ...

Recommended engine coolant
When adding coolant, use only deionized water or soft water for your vehicle and never mix hard water in the coolant filled at the factory. An improper coolant mixture can result in serious m ...

Categories


Copyright В© www.kisedona.com 2016-2024