Kia Sedona: Mode Control Actuator Description and Operation - Heater - Heating,Ventilation And Air Conditioning - Kia Sedona YP Service ManualKia Sedona: Mode Control Actuator Description and Operation

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Heating,Ventilation And Air Conditioning / Heater / Mode Control Actuator Description and Operation

Description
Located in the heater unit, the mode control actuator adjusts the position of the mode door by operating the mode control actuator according to the signal from the A/C control unit.
Pressing the mode select switch shifts the mode control actuator in the order of Vent → Bi-Level → Floor → Mix.
Temperature Control Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the temperature control actuator operates to the cool position when 1 ...

Mode Control Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when 12V is connected t ...

Other Information:

Adjusting the height up and down
2nd row outboard 2nd row center 2nd row for SXL package 3rd row To raise the headrest : 1. Pull it up to the desired position (1). To lower the headrest : 1. Push and hold the release ...

Piston and Connecting Rod Repair procedures
Disassembly     • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefully while holding the con ...

Categories


Copyright © www.kisedona.com 2016-2024