Inspection |
1. |
Press the MODE switch more than 4 times within 2 seconds while pressing the OFF switch.
* For diagnostic procedure, refer to DTC guide. |
Replacement |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the glove box housing.
(Refer to Body - "Glove Box Housing") |
3. |
Disconnect the cluster ionizer connector (A). |
4. |
Remove the cluster ionizer (B) after loosening the screw. |
5. |
Install in the reverse order of removal. |
Electronic Stability Control (ESC) OFF Indicator Light
This indicator light illuminates :
Once you set the ignition switch or Engine Start/Stop Button to the ON position.
- It illuminates for approximately 3 seconds and then goes off.
When you d ...
To defog inside windshield
1. Set the fan speed to the desired position.
2. Select desired temperature.
3. Press the defroster button ().
4. The outside (fresh) air position will be selected automatically and the air
con ...