Inspection |
1. |
The windshield deicer switch inputs can be checked using the GDS. |
2. |
To check the input value of windshield deicer switch, select option "Body Control Module". |
3. |
Select option "Current Data". |
4. |
To perform functional test on SJB outputs, select "Actuation Test". |
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the heater & A/C control unit.
(Refer to Heating, Ventilation, Air Conditioning - "Heater & A/C Control Unit (DATC))
(Refer to Heating, Ventilation, Air Conditioning - "Heater & A/C Control Unit (Manual)) |
Installation |
1. |
Install the heater & A/C control unit.
(Refer to Heating, Ventilation, Air Conditioning - "Heater & A/C Control Unit (DATC))
(Refer to Heating, Ventilation, Air Conditioning - "Heater & A/C Control Unit (Manual)) |
2. |
Connect the negative (-) battery terminal. |
Blind Spot Detection Unit Components and Components Location
Component
...
Front
Front
1. Front fan speed control knob
2. Front window defroster button
3. Rear window defroster button
4. Air conditioning button
5. Air intake control button
6. Front temperature control knob ...