Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover") |
3. |
Remove the pantoscopic camera (B) after loosening the mounting screws and connector (A). |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the tail gate back panel.
(Refer to Body - "Tail Gate Back Panel") |
3. |
Remove the rear pantoscopic camera (A) after loosening the screws. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the mirror (A) from mirror holder.
|
3. |
Disconnect the heating connector (A) from the mirror. |
4. |
Remove the door mirror housing (B) after separating the mounting clips (A). |
5. |
Disconnect the left/ right pantoscopic camera connector (A). |
6. |
Remove the left / right pantoscopic camera (B) after loosening the screws. |
Installation |
1. |
Install the front pantoscopic camera and then connect the connector. |
2. |
Install the front bumper cover. |
3. |
Connect the negative (-) battery terminal. |
1. |
Install the rear pantoscopic camera. |
2. |
Install the tail gate back panel. |
3. |
Connect the negative (-) battery terminal. |
1. |
Install the left / right pantoscopic camera and then connect the connector. |
2. |
Install the door mirror housing. |
3. |
Install the door mirror. |
4. |
Connect the negative (-) battery terminal. |
240,000 km (150,000 miles) or 120 months
❑ Rotate tire
❑ Inspect battery condition
❑ Inspect vacuum hose
❑ Inspect air conditioning refrigerant
❑ Inspect brake hoses and lines
❑ Inspect drive sh ...
Intake Air Temperature Sensor (IATS) Description and Operation
Description
Integrated into the Barometric Pressure Sensor (BPS), the
Intake Air Temperature Sensor (IATS) detects the intake air temperature.
To calculate precise air quantity, correction of th ...