Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the instrument cluster.
(Refer to Indicators And Gauges - "Instrument Cluster") |
3. |
Loosen the mounting screws from backward of the main crash pad. |
4. |
Remove the SVM unit (B) after disconnecting the connector (A). |
Installation |
1. |
Install the SVM unit and connector. |
2. |
Install the instrument cluster. |
3. |
Connect the negative (-) battery terminal. |
Auto Defogging Sensor (DATC only) Repair procedures
Inspection
To inspect and diagnose the sensor, refer to Self-Diagnosis procedure and DTC guide.
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the auto defogging se ...
Front Seat Shield Outer Cover Repair procedures
Replacement
[Front seat shield front cover]
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the re ...