Inspection |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the overhead console lamp assembly (A) after loosening 2 screws. |
3. |
Check for continuity between the terminals. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Carefully remove the lamp lens (A) from the room lamp with a flat-tip screwdriver. |
3. |
Remove the room lamp (A) after loosening the mounting screws. |
4. |
Check for continuity between the terminals. |
Inhibitor Switch Description and Operation
Description
•
The inhibitor switch is installed on top of transaxle, and is connected to the shift lever through shift cable.
•
Inhibitor switch signals (S1, S2, S3, S4) are t ...
Rearview camera
The rearview camera will activate with the ignition switch ON and the shift lever
in the R (Reverse) position
This system is a supplemental system that shows behind the vehicle through the
re ...