Circuit Diagram |
No. | Motor Connector | Sunroof Wiring Connector |
1 | Battery 1 | GND 1 |
2 | Open alarm | Rear lock switch |
3 | GND 1 | IGN |
4 | Rear lock switch | Signal C |
5 | - | Signal A |
6 | Signal C | Battery 1 |
7 | Signal B | Open alarm |
8 | Signal A | Speed signal |
9 | Signal D | Signal D |
10 | GND 1 | Signal B |
11 | Speed signal |     |
12 | IGN |
Heated Oxygen Sensor (HO2S) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the HO2S terminals 3 and 4.
4.
Check that the resistance is within the speci ...
Refrigerant Line Repair procedures
Replacement
1.
Discharge refrigerant from the refrigeration system.
2.
Replace faulty tube or hose.
Cap the open fittings immediately to keep moisture or dirt out ...