Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the tail gate trim [LH].
(Refer to Body - "Tail Gate Trim") |
3. |
Disconnect the STG spindle connector (A). |
4. |
Using a screwdriver, loosen the bracket (B) mounting bolts after lifting the socket clips (A) up slightly. |
5. |
Remove the STG spindle assembly (C).
|
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the luggage side trim [RH].
(Refer to Body - "Luggage Side Trim") |
3. |
Remove the tail gate trim [RH].
(Refer to Body - "Tail Gate Trim") |
4. |
Pull up the bottom of rear A/C duct (A). |
5. |
Remove the third row seat belt upper anchor (A) after loosening the bolt.
|
6. |
Loosen the mounting bolt (A). |
7. |
Remove the rear A/C duct (A) after loosening the bolt. |
8. |
Disconnect the STG spindle connector (A). |
9. |
Using a screwdriver, loosen the bracket (B) mounting bolts after lifting the socket clips (A) up slightly. |
10. |
Remove the STG spindle assembly (C).
|
Installation |
1. |
Install the STG spindle assembly.
|
2. |
Connect the STG spindle connector. |
3. |
Install the tail gate pillar trim [LH]. |
4. |
Connect the negative (-) battery terminal. |
1. |
Install the STG spindle assembly.
|
2. |
Connect the STG spindle connector. |
3. |
Install the rear A/C duct. |
4. |
Install the third row seat belt upper anchor.
|
5. |
Install the luggage side trim [RH]. |
6. |
Install the tail gate pillar trim [RH]. |
7. |
Connect the negative (-) battery terminal. |
84,000 km (52,500 miles) or 42 months
❑ Rotate tire
❑ Inspect battery condition
❑ Inspect air cleaner filter
❑ Inspect vacuum hose
❑ Inspect power steering fluid (if equipped)
❑ Inspect power ...
Description and Operation
Description
The SMART KEY system is a system that allows the user to
access and operate a vehicle in a very convenient way. To access the
vehicle, no traditional key or remote control unit is n ...