Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the tail gate trim.
(Refer to Body - "Tail Gate Trim") |
3. |
Disconnect the anti-pinch strip sensor connector (A). |
4. |
Remove the anti-pinch strip (A) after disconnecting the mounting clip. |
Installation |
1. |
Install the smart tailgate anti-pinch strip. |
2. |
Disconnect the smart tailgate anti-pinch strip sensor connector. |
3. |
Install the tail gate trim. |
4. |
Connect the negative (-) battery terminal. |
Water pump Troubleshooting
Troubleshooting
Trouble SymptomProbable CauseRemedyCoolant leakage
•
From the bleed hole of the water pump
Visually check
•
Check leaks after about 10 minutes of warming up.
...
Front Wiper Motor Components and Components Location
Component Location
1. Cap2. Nut3. Wiper arm & blade4. Rivet5. Cowl top cover6. Bolt7. Wiper motor & linkage assembly8. Wiper motor connector
...