Disconnect the smart tailgate latch and PCU assembly connector (A).
4.
Loosen the smart tailgate latch mounting bolts.
5.
Remove the smart tailgate latch and PCU assembly (A) after loosening the nuts.
Installation
1.
Install the smart tailgate latch and PCU assembly.
2.
Connect the smart tailgate latch and PCU assembly connector.
3.
Install the tail gate trim.
4.
Connect the negative (-) battery terminal.
Inspection
Inspection of the Smart Tailgate using GDS
1.
Check up through GDS analyzing device, the failure code,
monitoring on entered value, and by forcefully operating actuator and
self diagnosis, failed area can be detected promptly.
2.
Select the vehicle and menu to analyze the Smart Tailgate module.
3.
Select the "STM" to check the DTC of the power trunk module.
4.
Select the "Service Data" to see the current status in
accordance with the input/output value. Offer status of the each switch
and sensor.
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the luggage side trim [RH].
(Refer to Body - "Luggage Side Trim")
3.
Disconnect the smart tailgate unit connector (A).
...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the tail gate trim.
(Refer to Body - "Tail Gate Trim")
3.
Disconnect the anti-pinch strip sensor connector (A).
4.
R ...
Other Information:
TPMS Sensor Repair procedures
Removal
1.
Remove the tire.
(Refer to Tires/Wheels - "Tire")
2.
Remove the screw with torx driver (A).
•
When installing the bead brake, make sure tha ...
Heated Oxygen Sensor (HO2S) Description and Operation
Description
Heated Oxygen Sensor (HO2S) consists of the zirconium and the
alumina and is installed on upstream and downstream of the Warm-up
Catalytic Converter (WCC).
After it compares oxygen ...