Smart Key |
1. |
Connect the DLC cable of GDS to the data link connector (16
pins) in driver side crash pad lower panel, and then turn the power on
GDS. |
2. |
Select the vehicle model and then perform "Smart key code saving". |
3. |
After selecting "Smart Key Code Saving" menu, push "Enter" key, then the screen will be shown as below. |
4. |
After saving the smart key code, press "OK" button. |
5. |
Enter the "Pin code" for the first key teaching. |
6. |
Press the SSB with smart key within 5 sec after pressing "OK". |
7. |
Confirm the message "First key teaching completed". |
8. |
Press the SSB with smart key within 5 sec after pressing "OK". |
9. |
Confirm the message "Second key teaching completed". |
10. |
Then the screen will be shown as below when smart key saving process is completed. |
Water Jacket Seperator Components and Components Location
Components
1. Water jacket separator
...
Range (1)
The range is the estimated distance the vehicle can be driven with the remaining
fuel.
- Distance range : 1 ~ 9,999 km. or 1 ~ 9,999 mi
If the estimated distance is below 1km (1mi.), the tri ...