Set up to automatically operate wipers of rear window glass
when reverse gear shift is engaged while the wipers of windshield glass
are in operation in ''Instrument Panel - User Setting Menu (USM).
1.
Detach the rear wiper cap (A).
2.
Remove the rear wiper arm & blade (A) after removing rear wiper HEX nut (B).
3.
Remove the rear wiper cap & pad (A).
4.
Remove the tailgate trim after opening the tailgate.
(Refer to Body - "Tailgate Trim")
5.
Disconnect the rear wiper motor connector (A) and then remove the rear wiper motor (B) after loosening bolts.
Installation
1.
Install the rear wiper motor assembly.
Tightening torque bolt :
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)
2.
Install the tailgate trim.
3.
Install the rear wiper arm cap after tightening the nut.
Component Location
1. Head cap2. Rear wiper arm nut3. Rear wiper arm & blade4. Cap & pad assembly5. Rear wiper motor assembly6.Rear wiper motor bolt
...
Inspection
1.
Check for continuity between the terminals while operating
the wiper and washer switch. If it is not in normal condition, replace
wiper and wiper switch.
Rear Wiper Switch
Rear ...
Other Information:
External AMP Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the main crash pad assembly.
(Refer to Body - "Main Crash Pad Assembly")
3.
Remove the body control module.
(Refer to " ...
Rear Seat Assembly Components and Components Location
Component Location
[Second Row Seat Assembly]
1. Second Row Seat Assembly [RH]2. Second Row Center Seat Assembly3. Second Row Seat Assembly [LH]
1. Second Row Seat Assembly
[Third ...