Inspection |
1. |
When inspecting, use the inspection equipment to check for
input/output values at each position of Power Sliding Door control
module. |
2. |
To check the operation of latch, choose “Power Sliding/Tailgate” menu and vehicle. |
3. |
Select "Power Sliding Door". |
4. |
After selecting sensor output, operate the Power Sliding Door
in Power Mode and check the voltage of unlatch feedback (in closed
mode).
※ Actual voltage may differ from the above figure. |
5. |
When there’s no change in voltage, replace the latch. |
Repair procedures
On-vehicle Inspection
Inspect ignition coil assembly and Perform spark test
1.
Check for DTCs.
•
If a DTC is present, perform troubleshooting in accordanc ...
How to reset the power sliding door and power tailgate
If the battery has been discharged or disconnected, the related fuse has been
replaced or disconnected, and the power sliding door or power tailgate doesn't work
properly, the power sliding ...