Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Using a screwdriver or remover, remove the rear combination lamp cover (A). |
3. |
Remove the rear combination lamp (A) after loosening the mounting screws. |
4. |
Disconnect the rear combination lamp connector (A). |
1. |
Remove the rear combination lamp. |
2. |
Remove the turn signal lamp bulb (B) by turning the socket (A) counterclockwise. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the rear combination lamp cover (A). |
3. |
Disconnect the rear combination lamp connector (A). |
4. |
Remove the rear combination lamp (A) after loosening the mounting nuts. |
1. |
Remove the rear combination lamp cover. |
2. |
Remove the stop/tail lamp (B) by turning the socket (A) counterclockwise. |
Installation |
1. |
Connect the rear combination lamp connector. |
2. |
Install the rear combination lamp. |
3. |
Install the rear combination lamp cover. |
4. |
Connect the negative (-) battery terminal. |
1. |
Install the rear combination lamp. |
2. |
Connect the rear combination lamp connector. |
3. |
Install the rear combination lamp cover. |
4. |
Connect the negative (-) battery terminal. |
Cup holder
WARNING - Hot liquids
Do not place uncovered cups with hot liquid in the cup holder while the vehicle
is in motion. If the hot liquid spills, you may burn yourself. Such a burn to the
driver ...
Headlight position
When the light switch is in the headlight position, the head, tail, license lights
will turn ON.
✽ NOTICE
The ignition switch must be in the ON position to turn on the headlights. ...