Remove the overhead console lamp (A) after loosening the screws.
3.
Disconnect the connector (A) from the overhead console lamp.
Bulb Replacement
1.
Detach the overhead console lamp lens (A) from the overhead console lamp with a flat-tip screwdriver.
2.
Disconnect the overhead console lamp bulb (A).
Installation
1.
Connect the overhead console lamp connector.
2.
Install the overhead console lamp.
3.
Connect the negative (-) battery terminal.
Inspection
1.
Remove the overhead console lamp assembly then check for
continuity between terminals. If the continuity is not as specified,
replace the map lamp switch.
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Detach the personal lamp (A) using a flat-tip screwdriver.
3.
Disconnect the personal lamp connector (A).
Installation
1.
C ...
Inspection
1.
Check for continuity between terminals. If the continuity is not as specified, replace the hazard lamp switch.
Connector Pin Information
No.DescriptionNo.Description1ILL+ (TAIL)2 ...
Other Information:
Smart Tailgate Unit Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the luggage side trim [RH].
(Refer to Body - "Luggage Side Trim")
3.
Disconnect the smart tailgate unit connector (A).
...
Description and Operation
Description
AVN system
The AVN system provides improved search function and easy
access for drivers by offering simplified system operation experience
and integrated display for multimedia and ...