Kia Sedona: Vanity Lamp Repair procedures - Lighting System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Vanity Lamp Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body Electrical System / Lighting System / Vanity Lamp Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Detach the vanity lamp (A) using a flat-tip screwdriver.

3.
Disconnect the vanity lamp connector (A).

Installation
1.
Connect the vanity lamp connector.
2.
Install the vanity lamp.
3.
Connect the negative (-) battery terminal.
Luggage Room Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Detach the luggage room lamp lens (A) from the luggage room lamp with a flat-tip screwdriver. 3. Remove the luggage room lamp (A ...

Personal Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Detach the personal lamp (A) using a flat-tip screwdriver. 3. Disconnect the personal lamp connector (A). Installation 1. C ...

Other Information:

Engine Coolant Temperature Sensor (ECTS) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the ECTS connector. 3. Remove the ECTS (Refer to "Removal"). 4. After immersing the thermistor of the sensor into engine coola ...

Opening the fuel filler lid
The fuel filler lid must be opened from inside the vehicle by pulling up the fuel filler lid opener. If the fuel filler lid does not open because ice has formed around it, tap lightly or push o ...

Categories


Copyright В© www.kisedona.com 2016-2024