Xenon gas: Xenon gas activates the initial reaction for rapid illuminating.
Molybdenum electrode: anode arcing
Metal halide salts: color composing component
(2)
Lightening principle
When Xenon gas and metal halide salt discharge the molybdenum anode in a capsule, it emits light.
2.
Ignitor
Ignitor (A) is an electromagnetic transformer that receives
current from ballast and boost voltage to light on the arc light source
in any environment.
3.
Ballast
(1)
Ballast (A) delivers an instant high voltage pulse to the ignitor electrode, to initialize discharge in the source.
(2)
Ballast supplies the stable power to the bulb and the ignitor during initialization and normal state of arc.
4.
Stability
(1)
Durable for vibration as there is no filament.
(2)
Does not operate if polarity is changed.
(3)
Does not operate if the input voltage is not in the range of 10-16V.
Components
1. Low beam bulb2. Low beam bulb socket3. Dust cap (Low)4. High beam bulb5. High beam bulb socket6. Dust cap (High)7. Turn signal lamp bulb8. Turn signal lamp socket9. Side marker lamp ...
Removal
Head lamps become very hot during use; do not touch them or attach any hardware immediately after turning them off.
•
T ...
Other Information:
To increase cruise control set speed
Follow either of these procedures:
Move the lever up (to RES+), and hold it. Your vehicle set speed will increase
by 10 km/h (5 mph). Release the lever at the speed you want.
Move the lever ...
Rear Power Mosfet Repair procedures
Inspection
1.
Turn the ignition switch ON.
2.
Manually operate the control switch and measure the voltage of the blower motor.
3.
Operate the control switch to raise the voltage up to high ...
Kia Sedona: Head Lamps Description and Operation
Head Lamps Components and Components Location
Head Lamps Repair procedures