Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Install the driver''s door trim.
(Refer to Body - "Front Door Trim") |
3. |
Remove the IMS switch (A) after loosening the screws. |
Installation |
1. |
Install the IMS switch. |
2. |
Install the driver''''s door trim. |
3. |
Connect the negative (-) battery terminal. |
Inspection |
1. |
Remove the memory power seat connector. |
2. |
When each switch is pressed, check the electricity flow
between memory power seat switch connector and grounding, and if the
electricity does not match the specification, replace the switch. |
Applying the parking brake
To engage the parking brake, first apply the foot brake and then depress the
parking brake pedal down as far as possible.
CAUTION - Parking brake
Driving with the parking brake applied will ...
Securing a child restraint seat with child seat lower anchor system
Some child seat manufacturers make child restraint seats that are labeled as
LATCH or LATCH-compatible child restraint seats. LATCH stands for "Lower Anchors
and Tethers for Children". ...