Kia Sedona: Ignition Switch Assembly

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body Electrical System / Ignition Switch Assembly

Repair procedures

Removal [Horn (Low pitch)] 1. Remove the engine room under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover") 2. Remove the mounting clip (A). 3. Remove the low pitch ...

Repair procedures

Inspection 1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column. 2. Check for continuity between the terminals. 3. If continu ...

Other Information:

Seat belt restraint system
For maximum restraint system protection, the seat belts must always be used whenever the vehicle is moving. A properly positioned shoulder belt should be positioned midway over your shoulder ...

To operate
Type B Type C Go to the User Settings Mode (Driving Assist) and select FCW (Forward Collision Warning) on the LCD display (For more details, refer to "LCD Display" in chapter 4.). ...