Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel") |
3. |
Remove the fuel filler door open switch (A) after pushing the hooks inside. |
Installation |
1. |
Install the fuel filler door open switch. |
2. |
Install the crash pad lower panel. |
3. |
Connect the negative (-) battery terminal. |
Inspection |
1. |
Check the switch for continuity between the No. 1 and No. 6
terminals. If the continuity is not as specified, replace the fuel
filler door open switch. |
Push-starting
Vehicles equipped with automatic transaxle lock system cannot be push-started.
Follow the directions in this section for jump-starting.
WARNING - Tow starting vehicle
Never tow a vehicle to sta ...
Automatic door lock system
All doors will be automatically locked if the automatic transaxle shift lever
is shifted from the P(Park) position to the R (Reverse), N (Neutral), or D (Drive)
position. ...