Fuse Inspection |
1. |
Be sure that there are no loose fuse holders and that the fuses are held securely. |
2. |
Is the fuse capacity correct for each circuit? |
3. |
Are there any blown fuses?
|
Diagnosis with GDS |
1. |
The body electrical system can be quickly diagnosed for faulty parts using vehicle diagnostic system (GDS).
The diagnostic system (GDS) provides the following information:
|
2. |
Select the ''Car model'' and the system to be checked in order to check the vehicle with the tester. |
3. |
Select the ''Smart Junction Block (SJB)''. |
4. |
Select the ''Current Data" menu to search the current state of the input/output data.
The input/output data for the sensors corresponding to the Smart Junction Block (SJB) can be checked. |
5. |
If you wish to check the power door lock operation by force, select "Actuation test". |
6. |
If you want to change user option, select "user option". |
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower panel") |
3. |
Disconnect smart junction box connector (A) |
4. |
Remove the smart junction box (A) after loosening the nuts. |
Installation |
1. |
Install the smart junction box. |
2. |
Connect the smart junction box connector. |
3. |
Install the crash pad lower panel. |
4. |
Connect the negative (-) battery terminal. |
Recommended engine coolant
When adding coolant, use only deionized water or soft water for your vehicle
and never mix hard water in the coolant filled at the factory. An improper coolant
mixture can result in serious m ...
USB charger
Front
Rear
The USB charger is designed to recharge batteries of small size electrical devices
using a USB cable.The electrical devices can be recharged when the Engine Start/Stop
button is i ...