Kia Sedona: Blind Spot Detection Switch Repair procedures
Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body Electrical System / Blind Spot Detection System / Blind Spot Detection Switch Repair procedures
| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel") |
| 3. |
Remove the crash pad lower switch (A) after loosening the mounting screws.
|
| 4. |
Disconnect the connector (A) from the crash pad lower switch.
|
| Installation |
| 1. |
Connect the crash pad lower switch connector. |
| 2. |
Install the crash pad lower switch and crash pad lower panel. |
| 3. |
Connect the negative (-) battery terminal. |
| Inspection |
| 1. |
Disconnect the BSD switch connector from the crash pad lower switch assembly.
|
| 2. |
Operate the BSD switch, then check for continuity between terminals BSD switch connector.
|
Blind Spot Detection Switch Schematic Diagrams
Circuit Diagram
...
Other Information:
Brake Pedal Components and Components Location
Components
1. Cowl bracket2. Brake pedal member assembly3. Brake switch4. Return spring5. Brake pedal stopper6. Clevis pin7. Snap pin8. Brake pedal
...
Rear Axle Repair procedures
Removal
1.
Remove the front wheel and tire (A) from front hub.
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
Be careful not to damag ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2024 Owners Manual
- Kia Sedona YP 2014-2024 Service Manual
Copyright В© www.kisedona.com 2016-2024