Removal |
Take care not to scratch the crash pad and related parts. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the glove box housing.
(Refer to Body - "Glove Box Housing") |
3. |
Remove the multi box assembly (A) after loosening the screw. |
4. |
Disconnect the blower motor connector (A) and clip (B). |
5. |
Disconnect the BCM & Receiver unit connectors (A). |
6. |
Disconnect the mounting clip (A) and then remove the receiver (B) after loosening the nut. |
7. |
Remove the BCM & Receiver unit (A) after loosening the nuts. |
Installation |
1. |
Install the BCM & Receiver unit. |
2. |
Connect the BCM & Receiver unit connector. |
3. |
Connect the blower motor connector. |
4. |
Install the multi box assembly. |
5. |
Install the glove box housing. |
6. |
Connect the negative (-) battery terminal. |
7. |
Replace the BCM with a new one and then conduct BCM learning porcedure using GDS. |
BCM Diagnosis With GDS |
1. |
The body electrical system can be quickly diagnosed for faulty parts using vehicle diagnostic system (GDS).
The diagnostic system (GDS) provides the following information:
|
2. |
Select the ''Car model'' and the system to be checked in order to check the vehicle with the tester. |
3. |
Select the ''Body Control Module (BCM)'' to check body control module. |
4. |
Select the ''Current data" menu to search the current state of the input/output data.
The input/output data for the sensors corresponding to the ''Body Control Module (BCM)'' can be checked. |
5. |
If you want to change user option, select “user option”. |
To defog inside windshield
1. Set the fan speed to the desired position.
2. Select desired temperature.
3. Press the defroster button ().
4. The outside (fresh) air position will be selected automatically and the air
con ...
Automatic door lock system
All doors will be automatically locked if the automatic transaxle shift lever
is shifted from the P(Park) position to the R (Reverse), N (Neutral), or D (Drive)
position. ...