Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the console upper cover (A).
(Refer to Body - "Floor Console Assembly") |
3. |
Disconnect the multimedia jack connector (A) and multi switch connector (B). |
4. |
Remove the multimedia jcak (A) after releasing the fixed hooks. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the rear console assembly.
(Refer to Body - "Floor Console Assembly") |
3. |
Disconnect the USB charger connector (A). |
4. |
Remove the USB charger (A) after releasing the fixed hooks. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the rear console cover.
(Refer to Body - "Rear Console Cover") |
3. |
Remove the floor console tray (A) after loosening the screws. |
4. |
Remove the rear console switch panel (A) after loosening the screws. |
5. |
Remove the usb charger (A) after releasing the fixed hooks. |
Installation |
1. |
Install the multimedia jcak. |
2. |
Connect the console upper cover connector. |
3. |
Install the console upper cover. |
4. |
Connect the negative (-) battery terminal. |
1. |
Install the USB charger. |
2. |
Connect the USB charger connector. |
3. |
Install the rear console assembly. |
4. |
Connect the negative (-) battery terminal. |
1. |
Install the USB charger. |
2. |
Install the rear console switch panel. |
3. |
Install the floor console tray. |
4. |
Connect the USB charger connector. |
5. |
Install the rear console cover. |
6. |
Connect the negative (-) battery terminal. |
Engine Mounting Components and Components Location
Components
1.Engine mounting support bracket2.Engine mounting bracket3.Transaxle mounting bracket4.Roll rod bracket
...
Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications
Specification
Item SpecificationControl typeN/H (Normal High)Control pressure kpa (kgf/cm², psi)"500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42)"Current value (mA)50 ~ 850Coil resistance(Ω)5.1 ± 0.3
...