Kia Sedona: Audio Unit Repair procedures - Audio - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Audio Unit Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body Electrical System / Audio / Audio Unit Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the center fascia upper panel.
(Refer to Body - "Center Fascia Panel")
3.
Remove the audio head unit (A) after loosening the screws.

4.
Remove the audio head unit after disconnecting the connectors and cable (A).

   
When the compact disc cannot be ejected, do not pull it out by force.
Installation
1.
Connect the audio unit connectors and cable.
2.
Install the audio head unit.
3.
Install the center fascia upper panel.
4.
Connect the negative (-) battery terminal.
   
•
Make sure that the connectors are connected properly.
•
Check the audio system.
Audio Unit Components and Components Location
Components Connector Pin Information No.Connector AConnector B1Rear left speaker (+)CAN High2Front left speaker (+)-3Front right speaker (+)-4Rear right speaker (+)-5--6-USB D (+)7-USB VDD8Illum ...

Speakers Repair procedures
Inspection 1. Troubleshooting for Speaker (1) Basic inspection of speaker Inspect the sound from speaker after verifying that the speaker mounting screws are removed and the wiring connector ...

Other Information:

Manifold Absolute Pressure Sensor (MAPS) Repair procedures
Inspection 1. Connect the GDS to the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Pressure [kPa (kgf/cm², psi)]Output Voltage (V) [Ref=5V]20.0 (0 ...

Repair procedures
Removal     Put on gloves to protect your hands.     Use seat covers to avoid damaging any surfaces. 1. Remove the luggage side trim. (Refe ...

Categories


Copyright © www.kisedona.com 2016-2024