Kia Sedona: Front Seat Belt Buckle Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Front Seat Belt / Front Seat Belt Buckle Repair procedures

Replacement

1.	Remove the front seat assembly. (Refer to Front Seat - "Front Seat Assembly")

2.	Disconnect the front seat belt buckle connector wiring (A).

After loosening the mounting bolt, remove the front seat belt buckle (A).

Tightening torque :

39.2 ~ 53.9 N.m (4.0 ~ 5.5kgf.m, 28.9 ~ 39.8 lb-ft)

Install in the reverse order of removal.

Make sure that the connectors are plugged in properly.

Front Seat Belt Buckle Components and Components Location

Component Location 1. Front seat belt buckle ...

Rear Seat

...

Other Information:

Removing the spare tire
Your spare tire is stored underneath your vehicle, directly below the right sliding door. 1. Open the right sliding door and find the plastic hex bolt cover on the floor. 2. Remove the cover. ...

Engine Oil Pressure Warning Light
This warning light illuminates : Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It remains on until the engine is started. When the engine oil pressure is ...

Kia Sedona: Front Seat Belt Buckle Repair procedures

Front Seat Belt Buckle Components and Components Location

Rear Seat

Other Information:

Categories