Kia Sedona: Front Seat Belt Pretensioner Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Front Seat Belt / Front Seat Belt Pretensioner Repair procedures

Replacement

When installing the belt, be careful not to damage the pretensioner.

1.	Remove the center pillar upper trim. (Refer to Interior Trim - "Center Pillar Trim")

2.	After loosening the mounting bolts, remove the EFD system (A).

After disconnecting the lock pin, remove the front seat belt pretensioner connector (A), loosen the mounting bolt, and then remove the front seat belt pretensioner (B).

Tightening torque :

39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

Install in the reverse order of removal.

•	When ignition switch is turned "ON", check that the indicator lamp turns on for 6 seconds and then off, indicating normal operation of the system.

•	Make sure that the connectors are plugged in properly.

•	Replace any damaged clips.

Front Seat Belt Pretensioner Components and Components Location

Component Location 1. Front seat belt pretensioner ...

Height Adjust Components and Components Location

Component Location 1. Height adjust ...

Other Information:

Components and Components Location
Component Location 1. Auto light sensor2. Head lamps3. Lighting switch (Auto)4. Tail lamps5. BCM (Body Control Module) ...

Smart Tailgate
On a vehicle equipped with a smart key, the tailgate can be opened using the Smart Tailgate system. If the power door ON/OFF button is in the OFF (depressed) position, the smart tailgate will n ...

Kia Sedona: Front Seat Belt Pretensioner Repair procedures

Front Seat Belt Pretensioner Components and Components Location

Height Adjust Components and Components Location

Other Information:

Categories