Replacement |
|
1. |
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly") |
2. |
Remove the front seat shield outer cover.
(Refer to Front Seat - "Front Seat Shield Outer Cover") |
3. |
Remove the front seat shield inner cover.
(Refer to Front Seat - "Front Seat Shield Inner Cover") |
4. |
Push the lock pin (B) and then pull out the front seat headrest (A). |
5. |
Push the lock pins (B) from the front seat back board (A), then remove the back board.
|
6. |
Remove the front seat lower protector (A). |
7. |
Push the lock pin, then disconnect the front seat back duct lower (A). |
8. |
Remove the front seat back duct (A) after loosening the mounting screws. |
9. |
Disconnect the front seat lower connectors (A). |
10. |
Disconnect the fixing hook (A) from the front seat back lower. |
11. |
Disconnect the protector (A) from the front seat back frame. |
12. |
Turn the front seat back cover inside out. Then pull out the
headrest guides (A) while pinching both sides of the lower part of the
guides. |
13. |
Remove the front seat back cover (A) from the front seat back frame. |
14. |
After removing the velcro tape (A) and hog-ring clips (C) on the front of seat back, remove the front seat back cover (B). |
15. |
Install in the reverse order of removal.
|
ESC OFF Switch Repair procedures
Inspection
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash pad lower panel")
3.
Remove the crash pa ...
Operating condition
This system will activate when the indicator on the rear parking assist
OFF button is not illuminated. If you desire to deactivate the rear parking
assist system, press the rear parking assis ...