Kia Sedona: Rear Bumper beam Assembly Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Rear Bumper / Rear Bumper beam Assembly Repair procedures

Replacement

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Put on gloves to protect your hands.

Take care not to bend or scratch the trim and panels.

1.	Remove the rear bumper cover. (Refer to Rear Bumper - "Rear Bumper Cover")

2.	Loosen the rear bumper under side mounting nuts. [LH] [RH]

3.	Loosen the rear bumper beam mounting bolts. [LH] [RH]

4.	Remove the rear bumper beam assembly (A).

Install in the reverse order of removal.

•	Make sure that the connectors are plugged in properly.

•	Replace any damaged clips.

Rear Bumper beam Assembly Components and Components Location

Component Location 1. Rear Bumper Beam Assembly ...

Front Seat

...

Other Information:

Economical operation
Your vehicle's fuel economy depends mainly on your style of driving, where you drive and when you drive. Each of these factors affects how many miles (kilometers) you can get from a gallon (l ...

Description and Operation
Description It''s a system that uses illumination sensor to automatically turn ON the tail lamp and head lamp based on the change in surrounding environment''s illumination condition. It activa ...

Kia Sedona: Rear Bumper beam Assembly Repair procedures

Rear Bumper beam Assembly Components and Components Location

Front Seat

Other Information:

Categories