Kia Sedona: Rear Bumper Cover Components and Components Location - Rear Bumper - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Rear Bumper Cover Components and Components Location

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Rear Bumper / Rear Bumper Cover Components and Components Location

Component Location

1. Rear Bumper Cover


Components and Components Location
Components 1. Rear bumper side under cover2. Rear bumper side under cover3. Rear bumper beam assembly4. Rear bumper side lower bracket [LH]5. Rear bumper side lower bracket [RH]6. Rear bumper si ...

Rear Bumper Cover Repair procedures
Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. ...

Other Information:

Components and Components Location
Component Location Index Engine Room 1. Ambient temperature Sensor2. Receiver-drier3. Condenser4. Compressor5. Discharge Hose6. Service Port (Low Pressure)7. Service Port (High Pressure)8. A/C P ...

Sub Frame Repair procedures
Removal 1. Loosen the bolt (A) and then disconnect the universal joint assembly from the pinion of the steering gear box. Tightening torque: 32.4 ~ 37.3N.m (3.3 ~ 3.8kgf.m, 23.9 ~ 27.5lb-ft) ...

Categories


Copyright В© www.kisedona.com 2016-2024