Kia Sedona: Radiator Grill Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Front Bumper / Radiator Grill Repair procedures

Replacement

Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Remove the front bumper cover. (Refer to Front Bumper - "Front Bumper Cover")

2.	Disconnect the wiring fixing fastener (A).

3.	Remove the front bumper energy absorber (B).

4.	Loosen the screws and remove the radiator mesh (A).

5.	Loosen the screws and remove the radiator grill (A) from the front bumper.

6.	Loosen the screws and remove the radiator grill (A).

Install in the reverse order of removal.

Replace any damaged clips.

Radiator Grill Components and Components Location

Component Location 1. Radiator grill ...

Rear Bumper

...

Other Information:

168,000 km (105,000 miles) or 84 months
❑ Rotate tire ❑ Inspect battery condition ❑ Inspect air cleaner filter ❑ Inspect vacuum hose ❑ Inspect air conditioning refrigerant ❑ Inspect brake hoses ...

Windshield Deicer Repair procedures
Inspection 1. Remove the cowl top cover. (Refer to Body - "Cowl Top Cover") 2. Disconnect the windshield deicer connector (A). 3. Check for continuity between the terminals of deicer line ...

Kia Sedona: Radiator Grill Repair procedures

Radiator Grill Components and Components Location

Rear Bumper

Other Information:

Categories