Kia Sedona: Front Bumper Cover Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Front Bumper / Front Bumper Cover Repair procedures

Replacement

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Put on gloves to protect your hands.

Take care not to bend or scratch the trim and panels.

1.	Remove the front bumper upper cover (A) after loosening the screws.

2.	Loosen the radiator upper cover mounting bolts.

3.	Remove the engine room under cover (A) after loosening the mounting screws and bolts.

Loosen the front bumper side''s mounting screws to separate the side part.

When you pull out the front bumper, the side part of the front bumper could be damaged by the projection.

5.	Disconnect the fog lamp connector (A) and front bumper main connector (B). [LH] [RH]

6.	Remove the front bumper cover (A).

Install in the reverse order of removal.

•	Make sure that the connectors are plugged in properly.

•	Replace any damaged clips.

Front Bumper Cover Components and Components Location

Component Location 1. Front bumper cover ...

Radiator Grill Components and Components Location

Component Location 1. Radiator grill ...

Other Information:

Repair procedures
Service Adjustment Procedure Steering Wheel Play Inspection 1. Turn the steering wheel so that the front wheels can face straight ahead. 2. Measure the distance that the steering wheel ca ...

Interior light bulb replacement
1. Using a flat-blade screwdriver, gently pry the lens from the interior light housing. 2. Remove the bulb by pulling it straight out. WARNING - Interior lights Prior to working on the Interi ...

Kia Sedona: Front Bumper Cover Repair procedures

Front Bumper Cover Components and Components Location

Radiator Grill Components and Components Location

Other Information:

Categories