Replacement |
|
Take care not to bend or scratch the trim and panels. |
1. |
Remove the second row seat assembly.
(Refer to Rear Seat - "Rear Seat Assembly") |
2. |
Remove the third row seat assembly.
(Refer to Rear Seat - "Rear Seat Assembly") |
3. |
Remove the fourth row seat assembly.
(Refer to Rear Seat - "Rear Seat Assembly") |
4. |
Remove the rear door scuff trim.
(Refer to Interior Trim - "Door Scuff Trim") |
5. |
Remove the tailgate piller trim.
(Refer to Interior Trim - "Rear Piller Trim") |
6. |
Remove the rear transverse trim (A) using the screwdrive or remover. |
7. |
Remove the fire extinguisher cover (B). |
8. |
Remove the fire extinguisher bracket (C) after loosening the bolts. |
9. |
Remove the luggage side trim (D) after loosening the mounting screws and bolts. |
10. |
Install in the reverse order of removal.
|
Description and Operation
Description
The starting system includes the battery, starter, solenoid
switch, ignition switch, inhibitor switch (A/T), clutch pedal switch
(M/T), ignition lock switch, connection wires and th ...
Intake Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the intake actuator connector.
3.
Verify that the actuator operates to the recirculation position when 12V is connected to termina ...