Replacement |
|
Take care not to bend or scratch the trim and panels. |
1. |
Remove the luggage side trim.
(Refer to Interior Trim - "Luggage Side Trim") |
2. |
Remove the second row seat belt upper anchor cover (A) using a screw driver or remover. |
3. |
Remove the second row seat belt upper anchor (A) after loosening the mounting bolts. |
4. |
Open the cap (B), then remove the rear pillar trim (C) after loosening the mounting bolts. |
5. |
Install in the reverse order of removal.
|
|
Take care not to bend or scratch the trim and panels. |
1. |
Remove the tailgate weatherstrip.
(Refer to Tailgate - "Tailgate Weatherstrip") |
2. |
Loosen the third row seat belt lower anchor mounting bolt . |
3. |
Open the cap (A), then remove the tailgate pillar trim (B) after loosening the mounting bolt. |
4. |
Install in the reverse order of removal.
|
Rear Shock Absorber Repair procedures
Removal
1.
Remove the rear wheel and tire (A) from rear hub.
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
Be careful not to damage ...
Air cleaner
Filter replacement
It must be replaced when necessary, and should not be washed.
You can clean the filter when inspecting the air cleaner element.
1. Lift up and open the air cleaner cover(1).
...