Replacement |
|
Take care not to bend or scratch the trim and panels. |
1. |
Remove the front door body side weatherstrip. |
2. |
Remove the front pillar trim (A) using a screwdriver or remover. |
3. |
Install in the reverse order of removal.
|
Headlight position
When the light switch is in the headlight position, the head, tail, license lights
will turn ON.
✽ NOTICE
The ignition switch must be in the ON position to turn on the headlights. ...
Rear Stabilizer Bar Repair procedures
Removal
1.
Remove the rear wheel and tire (A) from rear hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
Be careful not to damage ...